Doug Fleenor Design DMX24DIM Manual de instalação e operação - Página 4
Procurar online ou descarregar pdf Manual de instalação e operação para Regulador de fluxo luminoso Doug Fleenor Design DMX24DIM. Doug Fleenor Design DMX24DIM 6 páginas.
Também para Doug Fleenor Design DMX24DIM: Manual de instalação e operação (5 páginas)
Imprimir páginaSetting the address switches
The front panel address switches are used to select the DMX512 starting address for
the DMX24DIM. Any starting address from 1 - 512 can be selected. The address
shown on the switches will be the DMX512 address for the first dimmer output. The
next 23 consecutive DMX512 levels will be applied to the remaining dimmer channels.
When the address switches are set to 000, the DMX24DIM operates as if the address
switches were set to 001.
The address switches are also used for a local test function described below.
Local control
Local control mode is used to turn on an output without the use of a DMX512 signal
source. To use local control, set the DMX address switches to 601 to turn on channel
1, 602 for channel 2, etc.
LED indicators
The LED indicators on the front of the DMX24DIM have the following functions:
LED label
Function
SIGNAL
On when DMX is present, flashes when local control is active
MIMIC 1
Tracks the current level of dimmer 1 for troubleshooting purposes
PWR
On when power is on
Page 4 of 6