- ページ 19

メディア・コンバーター Baumer AMG11 N29のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Baumer AMG11 N29 41 ページ。 Absolute encoders with profinet interface

ページを印刷する
Baumer AMG11 N29 マニュアル

4.5. Topology planning

It is obligatory to plan the topology in order to perform IRT Class3 and / or to utilize the system feature
"Device replacement without exchangeable medium". Port connections and cable lengths between all system
components are made known to the project. In this way the project tool is enabled to consider cable-, port-
and switch delay times and to optimize overall performance.
Enter Topology Planning e.g. by right-clicking the PROFINET bus rail in the Hardware window of Step7
software, which opens the following pull-down menu.
The Graphic View clearly shows port assignment of all bus components. The assignment made here must fit
to the real conditions.
In the example below, controller port1 is linked to port 1 of the encoder. The programming tool (PG/PC) is
connected to port 2 of the controller.
Baumer_BUDE-PROFINET_MA_EN.docx
19/41
www.baumer.com
14.06.2016 / bja