- ページ 13

ネットワーク・ルーター Asus RT-G32 - Wireless RouterのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Asus RT-G32 - Wireless Router 26 ページ。 Broad range wireless family router
Asus RT-G32 - Wireless Router にも：クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (13 ページ)

ページを印刷する

Enable Manual Assignment?: Enable this function to assign static IP address by manually.

MAC Address: Enter the MAC Address of each DHCP client.

IP Address: Assign an IP address for each DHCP client. The IP address should comply with

the DHCP address pool you specified. The DHCP address pool contains the range of the IP

address that will automatically be assigned to the clients on the network.

Route

This function allows you to add routing rules into RT-G32. It is useful if you connect several

routers behind RT-G32 to share the same connection to the Internet.

Network/Host IP: It stands for the destination network or host of a route rule. So it could be a

host address, such as 「192.168.123.11」 or a network address, such as 「192.168.0.0」.

Netmask: It indicates how many bits are for network ID and subnet ID. For example: if the

dotted-decimal netmask is 255.255.255.0, then it's netmask bits is 24. If the destination is a

host, its netmask bits should be 32.

Gateway: It stands for the IP address of gateway where packets are routed to. The specified

gateway must be reachable first. It means you have to set up a static route to the gateway

beforehand.

Metric: Metric is a value of distance for the network

Interface: Network interface that the route rule applies to.