- ページ 13

メディア・コンバーター Baumer Hubner Berlin PMG10のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Baumer Hubner Berlin PMG10 44 ページ。 Absolute encoder
Baumer Hubner Berlin PMG10 にも：取付・取扱説明書 (32 ページ), 取付・取扱説明書 (32 ページ)

ページを印刷する

Baumer Hübner

Ill. 4: Installing encoder, mounting device and coupling

Drive shaft

Attachment device (customized)

Tools

2.5 mm

Instruction:

a) Prior to installation, check the drive runout error and dimensions.

b) Mount the encoder in a way ensuring the electrical connection is protected against direct

water ingress.

c) Apply grease onto the drive shaft.

d) Mount the attachment device (customer-specific) to the drive using the fastening screws.

e) Push coupling onto the encoder shaft and tighten to the specified torque.

K35 permitted tightening torque:

Mt = 1 ±10 % Nm (plastic side)

Mt = 1.3 ±10 % Nm (metal side)

f) Mount the encoder using suitable screws, e.g. M6x16 mm (ISO 4017) onto the B10 flange of

drive or attachment device (customer-specific).

g) Fasten the coupling on the drive shaft.

K35 Permitted tightening torque:

Mt = 1 ±10 % Nm (plastic side)

Mt = 1.3 ±10 % Nm (metal side)

Observe the remarks in the data sheet and the coupling assembly instructions.

V1 | PMG10 & PMG10P SSI

10 mm

Mounting screw M6x16 mm for attach-

ment device (ISO 4017)

Coupling

Operating Manual

Installation