Baumer Hubner Berlin PMG10 운영 매뉴얼 - 페이지 13

{카테고리_이름} Baumer Hubner Berlin PMG10에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer Hubner Berlin PMG10 44 페이지. Absolute encoder
Baumer Hubner Berlin PMG10에 대해서도 마찬가지입니다: 설치 및 작동 지침 (32 페이지), 설치 및 작동 지침 (32 페이지)

페이지 인쇄

Baumer Hübner

Ill. 4: Installing encoder, mounting device and coupling

Drive shaft

Attachment device (customized)

Tools

2.5 mm

Instruction:

a) Prior to installation, check the drive runout error and dimensions.

b) Mount the encoder in a way ensuring the electrical connection is protected against direct

water ingress.

c) Apply grease onto the drive shaft.

d) Mount the attachment device (customer-specific) to the drive using the fastening screws.

e) Push coupling onto the encoder shaft and tighten to the specified torque.

K35 permitted tightening torque:

Mt = 1 ±10 % Nm (plastic side)

Mt = 1.3 ±10 % Nm (metal side)

f) Mount the encoder using suitable screws, e.g. M6x16 mm (ISO 4017) onto the B10 flange of

drive or attachment device (customer-specific).

g) Fasten the coupling on the drive shaft.

K35 Permitted tightening torque:

Mt = 1 ±10 % Nm (plastic side)

Mt = 1.3 ±10 % Nm (metal side)

Observe the remarks in the data sheet and the coupling assembly instructions.

V1 | PMG10 & PMG10P SSI

10 mm

Mounting screw M6x16 mm for attach-

ment device (ISO 4017)

Coupling

Operating Manual

Installation