- ページ 29
メディア・コンバーター Baumer HUBNER BERLIN PROFI NET microGen HMG10PのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Baumer HUBNER BERLIN PROFI NET microGen HMG10P 44 ページ。 Incremental encoder with magnetic sensing
Baumer HUBNER BERLIN PROFI NET microGen HMG10P にも： 取付・取扱説明書 (32 ページ), 取付・取扱説明書 (40 ページ)
ページを印刷する
Baumer Hübner
6.2.3
Switching level additional output incremental (optional)
Switching level
High/Low
Transmission length
Output frequency
I
The TTL/HTL output (Vin = Vout) at the additional incremental output is galvanically isolated
and requires separate voltage supply.
Tab. 1: Switching level additional output incremental (optional)
6.2.4
Programming interface (only for programmable variant)
Encoder parameters such as additional output, switch-off and switch-on speeds can be
changed and read out via connection SA and SB. The Z-PA.SDL1 WLAN adapter can be used
for encoder access via web browser.
Also see about this
2 Z-PA.SDL.1 WLAN adapter: Programming device for HMG10P/PMG10P [} 33]
6.2.5
LED activity indicator
LED
INC1
INC2 (additional output incre-
mental
Status
Speed
Tab. 2: LED activity indicator
V1, T1 | HMG10 & HMG10P EtherNet/IP
TTL/RS422
≥ 2,5 V / ≤ 0,5 V
≤ 550 m bei 100 kHz
≤ 600 kHz
red
No function
Undervoltage
n
Overload
n
Excess temperature
n
Internal error
Speed higher than switching
speed (overspeed)
Operating Manual
Electrical installation
TTL/HTL (Vin = Vout)
≥ 2,5 V / ≤ 0,5 V (TTL)
n
≥ Ub − 3 V / ≤ 1,5 V (HTL)
n
≤ 550 m bei 100 kHz (TTL)
n
≤ 350 m bei 100 kHz (HTL)
n
≤ 600 kHz (TTL)
n
≤ 350 kHz (HTL)
n
green
No function
OK
OK
Speed below switching speed
|
6
I
29