- ページ 3

キャッシュカウンター Baumer NE215のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Baumer NE215 40 ページ。 Electronic preselection counter

Safety Instructions

NE215

The overvoltages to which the units are subjected at the connection

terminals must be limited to the value of the overvoltage category II

(see Technical Data)!

The units may not be operated

– in hazardous areas,

– as medical units,

– in applications expressly named in EN 61010!

If the units are used to control/monitor machines or processes with

which, as the result of a failure/malfunction or incorrect operation

of the units

– a life-threatening danger,

– health risks or

– a danger of property or environmental damage

could result, then appropriate safety precautions

must be taken!

Do not open the housing of the units or make any

changes to it!

Tampering with the units can have a negative affect on their

operating safety, resulting in dangers!

Do not make repairs on the units! Return defective units to the

manufacturer!

1.3 Installation/commissioning

In case of changes (including in the operating behavior) that

impair safety, shut-down the units immediately.

Installation may only be carried out in accordance with the

procedure described in Chapter 3 "Connecting".

During installation work on the units, the power supply must

always be disconnected. Installation work may only be carried out

by appropriately trained experts.

Max. voltage 250 V terminal - terminal, ground - terminal.

Following proper assembly and installation, the units are ready for

operation. Following commissioning, familiarize yourself with the

use of the units in Chapter 4 "Operator Level".

1.4 Maintenance/repairs

Always disconnect the power supply of all units involved.

Maintenance and repair work may only be carried out by

appropriately trained experts.

If troubleshooting is unsuccessful, do not continue to use the units.

Please contact the manufacturer in this case.