- ページ 4
レシーバー Amphony 1500のPDF ユーザー・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Amphony 1500 8 ページ。 5.8 ghz digital wireless audio transmitter / receiver
Amphony 1500 にも： 技術仕様 (2 ページ), ユーザー・インストール・マニュアル (17 ページ), 製品情報 (4 ページ), 仕様 (4 ページ), ユーザー・インストール・マニュアル (9 ページ)
ページを印刷する
User and Installation Guide
Step 3
Connecting the receiver
The receiver connects to a line-in interface via the supplied RCA cable. Most
audio devices, such as amplifiers, provide a line-in interface.
If no line-in interface is available, the receiver can also be connected to other
audio inputs by using an appropriate adapter. It should be noted that the
maximum audio level of the receiver output is 1 Vrms (V ± 1.4 V maximum).
Ensure that the connected audio device will accept this audio level.
Connect the DC power input with the supplied AC adapter. The use of a surge
protector is recommended to protect the receiver from power surges which may
damage the receiver or may cause audio dropouts.
Do not connect the receiver audio output directly to passive
ATTENTION!
speakers or other low impedance drains as this may damage the
receiver! The receiver audio output cannot drive passive speakers
or headphones directly. An external amplifier is required.
L
AUDIO
LINE IN
L
Audio Drain
(Amplifier)
Receiver
R
DC 9V
R
pp
AC adapter
DC 9 V
300 mA
R R
Power outlet
Page 3