Amphony 1500 사용자 및 설치 설명서 - 페이지 4
{카테고리_이름} Amphony 1500에 대한 사용자 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphony 1500 8 페이지. 5.8 ghz digital wireless audio transmitter / receiver
Amphony 1500에 대해서도 마찬가지입니다: 기술 사양 (2 페이지), 사용자 및 설치 설명서 (17 페이지), 제품 정보 (4 페이지), 사양 (4 페이지), 사용자 및 설치 설명서 (9 페이지)
페이지 인쇄
User and Installation Guide
Step 3
Connecting the receiver
The receiver connects to a line-in interface via the supplied RCA cable. Most
audio devices, such as amplifiers, provide a line-in interface.
If no line-in interface is available, the receiver can also be connected to other
audio inputs by using an appropriate adapter. It should be noted that the
maximum audio level of the receiver output is 1 Vrms (V ± 1.4 V maximum).
Ensure that the connected audio device will accept this audio level.
Connect the DC power input with the supplied AC adapter. The use of a surge
protector is recommended to protect the receiver from power surges which may
damage the receiver or may cause audio dropouts.
Do not connect the receiver audio output directly to passive
ATTENTION!
speakers or other low impedance drains as this may damage the
receiver! The receiver audio output cannot drive passive speakers
or headphones directly. An external amplifier is required.
L
AUDIO
LINE IN
L
Audio Drain
(Amplifier)
Receiver
R
DC 9V
R
pp
AC adapter
DC 9 V
300 mA
R R
Power outlet
Page 3