- ページ 5

ストーブ Dovre Inbouwhaard 2175CBS3のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Dovre Inbouwhaard 2175CBS3 15 ページ。 Soapstone casing

Fig.10: soapstones 6 (2x) can be put into place. Put nylon plugs in soapstones 6, 8 and 9 (2x). Each

soapstone should contain 2 plugs. Now soapstones 7, 8 and 9 (2x) can be put into place; mount them

with 4.2x15 crosshead screws (8x).

Fig.11: use braces c (4x) to connect soapstone 6 (2x) to back plate 24. Put brace 21 into place and

connect it to the back plate using M6x16 bolts (flat crosshead, 2x) and nuts. Brace 21 is supported by

the device.

Fig.12: put soapstones 10(2x), 11(2x), 12(2x), 13(2x) and 14 into place. Start with the one on the

outside. Soapstones 10(2x) fit on braces c. If after putting the stones in place you see too much play

between the stones and the raised lips of sheet metal brace 21, you can put some extra pressure on

these lips so that the Stone is gripped more tightly.

Fig.13: put braces a, a' and d(2x) into place. Braces a and a' are used to connect soapstones 10(2x) and

11(2x). Now position sheet metal brace 22 onto the stones. Sheet metal brace 22 holds the soapstones

together. You can put some extra pressure on the raised lips to tighten their grip if there is too much

play between them and the stones. Brace 22 contains 2 holes which fit onto brace a and a'.

Fig14: top stones 15 and 16 can be put in place. Depending on the version (top or rear connection), a

smoke outlet opening may be provided. Floor plate 17 is installed last. Slide it in front of the device.

03.27680.000