- ページ 3
製氷機 Follett HCD1400NBTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Follett HCD1400NBT 8 ページ。 With remote air-cooled condensing unit
Follett HCD1400NBT にも： 取付説明書 (17 ページ), マニュアル (8 ページ)
ページを印刷する
Horizon
Chewblet ice icemaker
1
Locating the icemaker (continued)
Manufacturer
Model Number
4500-30N
FS-22N
Lancer
dispensers
FS-30N
FS-44N #
DB/ED/DF 200 series
DB/ED/DF 250 series
DB/ED/DF 300 series
Cornelius
dispensers
FlavorFusion
IDC200
IDC250
MDH-302
SerVend
dispensers
MDH-402
*All approved dispensers can be filled with a Satellite-fill Horizon icemaker model without a top kit.
§
60- inch models: Please specify number of Horizon icemakers and location. D = 2; R = 1 on right side; L = 1 on left side
† Requires minimum 0.5" (1.27 cm) clearance between back of dispenser and wall.
** Net height after installation of top kit (excluding height of icemaker).
# F-44N consists of 2 separate 22" (55.9 cm) dispensers. A top kit is needed for each Horizon icemaker ordered.
2
Undercounter/in-cabinet mounting
Important specifier notes
1. Cabinet door opening
must meet minimum size
requirements shown and be
free of obstructions to allow
icemaker to slide out (no lip
or utilities to block removal).
2. Cabinet base must be
capable of supporting
icemaker and allow icemaker
to rest flat on cabinet bottom.
3. No counter supports, electric
or plumbing can run in front
of the icemaker.
4. Ice transport tube needs
minimum 1/4" per foot
(2 cm per meter) pitch
toward icemaker and should
be secured to prevent dips
and traps from forming. See
page 4.
Top mounting – compatible ice & beverage dispensers*
Width
Depth
in (cm)
in (cm)
30.0 ( 76)
30.5 (78)
22.0 ( 56)
30.5 (78)
30.0 ( 76)
30.5 (78)
44.0 (119)
30.5 (78)
30.0 ( 76)
30.0 (76)
30.0 ( 76)
30.0 (76)
44.0 (119)
30.0 (76)
30.0 ( 76)
30.7 (78)
30.0 ( 76)
30.7 (78)
30.0 ( 76)
30.7 (78)
42.8 (109)
31.0 (79)
60.0 (152)
30.5 (78)
Cabinet details
Ice transport tube
minimum 1/4" per foot
(2 cm per meter)
Cabinet door
pitch toward icemaker
opening
secure to prevent dips
and traps from forming
21"W x 24.5"H
(53 cm x 62 cm)
minimum
slides
out
Cabinet base
must be flat & free of obstructions
(no lip or utilities to block removal)
Follett Corporation
801 Church Lane • Easton, PA 18040, USA
+1 (610) 252-7301 • Fax +1 (610) 250-0696
www.follettice.com
KaTom Restaurant Supply, Inc.
1000 series, 1400 series or 1800 series
with remote air-cooled condensing unit
Height**
in (cm)
36.50 ( 93)
42.13 (107)
42.13 (107)
42.13 (107)
34.38 ( 87)
38.38 ( 98)
34.00 ( 86)
39.38 (100)
39.38 (100)
36.38 ( 92)
32.38 ( 82)
32.38 ( 82)
12" (30 cm) minimum
between icemaker
and dispenser
Follett Europe Polska
Mokry Dwór 26C • 83-021 Wislina, Poland
+48 (58) 785-6140 • Fax +48 (58) 785-6159
www.folletteurope.com
Undercounter/in-cabinet mounting
Harmony top kit – specify "F" for front facing,
or "B" for backward facing units
HCD1000 & HCD1400 series
HTL30RC-F
HTL22RC-F
HTL30RC- (F or B)
(2) HTL22RC-F
HTC30RC-F
HTC30RC-F
HTC44RC- (F or B)
HTC30RC-10F-FF
HTC30RC-10F-IDC
HTC30RC-10F-IDC
HTS44RC- (F or B)†
HTS60RC- §(F or B)†
electric
see dispenser
specification
sheet for
water
installation
requirements
drain
Form# 3815
3