- ページ 4

製氷機 Follett HCD1400NBTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Follett HCD1400NBT 8 ページ。 With remote air-cooled condensing unit
Follett HCD1400NBT にも：取付説明書 (17 ページ), マニュアル (8 ページ)

ページを印刷する

Horizon

Chewblet ice icemaker

Horizon icemaker mounting accessories

Optional wall mount bracket

28.4"

(72 cm)

Horizon ice tube runs - specifier guidelines

minimum of

6" (15 cm)

beverage

turn/corner

dispenser

ice transport tube –

1 3/16" OD,

2 1/8" OD with insulation

Form# 3815

Optional machine stand

24.5"

(62 cm)

24.5"

A - 15.875" (40 cm),

(62 cm)

B - 19.375" (49 cm)

Satellite-fill long tube runs

support

maximum

straps

2 ft (61 cm)

radius

transport tube slope

(toward icemaker)

1/4"

(2 cm per meter)

KaTom Restaurant Supply, Inc.

1000 series, 1400 series or 1800 series

with remote air-cooled condensing unit

Satellite-mounting installations/Horizon ice tube runs

6.8"

(17 cm)

C - 13" (33 cm),

D - 21" (53 cm)

wall-mounted

icemaker

Follett Corporation

801 Church Lane • Easton, PA 18040, USA

+1 (610) 252-7301 • Fax +1 (610) 250-0696

www.follettice.com

Important specifier notes:

1. For secure wall mounting, specify

optional wall mount bracket.

2. Wall and fasteners must support the

weight of the icemaker, bracket, supply

water and ice. Use of a backing board

may be required with hollow wall

construction.

3. Machine stand mounting adds 6.8"

(17 cm) to height of icemaker.

4. No dips in tube routing allowed.

5. Ice transport tube needs minimum 1/4"

per foot (2 cm per meter) pitch toward

icemaker and should be secured to

prevent dips and traps from forming.

Important specifier notes:

1. 75 ft (23 m) maximum ice

transport tube run.

2. Tubing routing bends must have

a 6" (15 cm) radius or larger.

3. If not supported from underneath,

secure insulated ice transport

tube at least every 2 ft (61 cm) to

prevent dips or traps.

4. Relative humidity levels above

80% in areas where the icemaker

or ice transport tube are

located may produce excessive

condensation that will cause

water damage.

5. Contact factory for

recommendations on running

tubing through a decorative soffit

or chase.

Follett Europe Polska

Mokry Dwór 26C • 83-021 Wislina, Poland

+48 (58) 785-6140 • Fax +48 (58) 785-6159