- ページ 8

冷凍庫 CombiSteel 7072 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CombiSteel 7072 Series 9 ページ。

Assembly of cooler



The protective film should be removed (if it exists)



By using adjustable feet, make the cooler stable. Avoid gaps, prevent vibration.



Compressor group air inlet must not be prevented. This is the most important issue. Allocate your product

that it will be parallel to the ground, no aim is required. Adjustable feet and rollers must touch the base. The

distance between compressor group and wall is important. More distance, provides increasing performance.

For that reason, at least 15 cm gap is required.



After transport of the cooler, before operating it, you should wait for three hours.



The first running must be done when the cooler is empty. Loading can be done after this period.



Connection of the cooler must be checked by experienced electrician. The fuse height must be 170 cm.



For fault current, electric connection must be supported with 30 mA fuse.



The cooler must be also provided with the nearest ground.