CombiSteel 7072 Series Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CombiSteel 7072 Series. CombiSteel 7072 Series 9 pagina's.
Pagina afdrukken
Assembly of cooler
The protective film should be removed (if it exists)
By using adjustable feet, make the cooler stable. Avoid gaps, prevent vibration.
Compressor group air inlet must not be prevented. This is the most important issue. Allocate your product
that it will be parallel to the ground, no aim is required. Adjustable feet and rollers must touch the base. The
distance between compressor group and wall is important. More distance, provides increasing performance.
For that reason, at least 15 cm gap is required.
After transport of the cooler, before operating it, you should wait for three hours.
The first running must be done when the cooler is empty. Loading can be done after this period.
Connection of the cooler must be checked by experienced electrician. The fuse height must be 170 cm.
For fault current, electric connection must be supported with 30 mA fuse.
The cooler must be also provided with the nearest ground.
8