- ページ 4

冷蔵庫 Follett EREF4-00000のPDF 設置、操作、サービスマニュアルをオンラインで閲覧またはダウンロードできます。Follett EREF4-00000 20 ページ。 Undercounter refrigerator

Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––

Installing Feet – Required

1. Remove feet from plastic bag packed inside refrigerator.

2. Tip refrigerator back and screw feet in all the way to stop (they will

extend 2 mm below base of EREF).

3. Adjust feet as needed to level EREF in both directions. To access legs,

remove the lower front panel. Turn legs clockwise to extend legs.

Installing Shelves – Required

1. Remove shelves and shelf brackets packed inside refrigerator.

2. Install shelf brackets in pilasters (insert top tab, squeeze and push in lower

tab).

3. Position shelves on shelf brackets in a position to achieve even

distance between shelves (approx. 145mm).

4. Use a pliers to remove the upper screw of the pilaster and install the bracket

securing the shelves.

Changing Temperature Controller Settings – Optional

Follett's temperature controller is pre-programmed with a 4 C set point and

°C display. The 4 C set point delivers a temperature range of 4 C – 6 C that

may not meet the needs of your specific application. Follett's controller set

point can be changed to deliver the required range. Refer to page 6 for

instructions on changing set point.

EREF Refrigerator

Fig. 1

Fig. 2

Fig. 3