- ページ 4

冷凍庫 Follett FZR4-ADAのPDF 設置、操作、サービスマニュアルをオンラインで閲覧またはダウンロードできます。Follett FZR4-ADA 20 ページ。 Undercounter freezer
Follett FZR4-ADA にも：設置、操作、サービスマニュアル (20 ページ)

ページを印刷する

Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Installing Legs – Required

1. Remove legs from plastic bag packed inside freezer.

2. Tip freezer back and screw legs in all the way to stop (Fig. 1). Legs

will extend 1/8" (3.175mm) below base of freezer.

3. Adjust legs as needed to level freezer in both directions. To access

legs, remove the lower front panel. Turn legs clockwise to extend

legs.

Installation Shelves – Required

1. Remove shelves and shelf brackets packed inside freezer.

2. Install shelf brackets in pilasters. Insert top tab, squeeze and push

in lower tab (Fig. 2).

Changing Temperature Controller Settings – Optional

Follett's temperature controller is pre-programmed with a -25 C (-13 F)

set point and degrees C display. The -25 C (-13 F) set point delivers a

temperature range of -23 to -25 C (-9 to -13 F).

Follett's controller set point can be changed to deliver up to a -15 C (+5 F)

temperature for applications where a lower temperature is not desired (i.e.,

ice cream). See

Controller Operation on page 7

FZR Undercounter Freezer

to change controller settings.

Fig. 1

Fig. 2

Fig. 3