Follett FZR4-ADA 설치, 운영 및 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Follett FZR4-ADA에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett FZR4-ADA 20 페이지. Undercounter freezer
Follett FZR4-ADA에 대해서도 마찬가지입니다: 설치, 운영 및 서비스 매뉴얼 (20 페이지)

페이지 인쇄

Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Installing Legs – Required

1. Remove legs from plastic bag packed inside freezer.

2. Tip freezer back and screw legs in all the way to stop (Fig. 1). Legs

will extend 1/8" (3.175mm) below base of freezer.

3. Adjust legs as needed to level freezer in both directions. To access

legs, remove the lower front panel. Turn legs clockwise to extend

legs.

Installation Shelves – Required

1. Remove shelves and shelf brackets packed inside freezer.

2. Install shelf brackets in pilasters. Insert top tab, squeeze and push

in lower tab (Fig. 2).

Changing Temperature Controller Settings – Optional

Follett's temperature controller is pre-programmed with a -25 C (-13 F)

set point and degrees C display. The -25 C (-13 F) set point delivers a

temperature range of -23 to -25 C (-9 to -13 F).

Follett's controller set point can be changed to deliver up to a -15 C (+5 F)

temperature for applications where a lower temperature is not desired (i.e.,

ice cream). See

Controller Operation on page 7

FZR Undercounter Freezer

to change controller settings.

Fig. 1

Fig. 2

Fig. 3