Follett FZR4-ADA 설치, 운영 및 서비스 매뉴얼 - 페이지 6

{카테고리_이름} Follett FZR4-ADA에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett FZR4-ADA 20 페이지. Undercounter freezer
Follett FZR4-ADA에 대해서도 마찬가지입니다: 설치, 운영 및 서비스 매뉴얼 (20 페이지)

페이지 인쇄
Follett FZR4-ADA 설치, 운영 및 서비스 매뉴얼

Changing Temperature Display - Optional

NOTICE!
It is important that you review the temperature cut-out settings
after you change the temperature display. The controller contains
two separate temperature channels; F and C. Changes made
to the factory default settings while displaying temperatures
in F will not automatically transfer when you change the
temperature display to C.
Follett freezers are factory-set to display temperatures in degrees C
(Celsius). To display the temperature in degrees F (Fahrenheit), follow
these steps:
1. Move the power switch to OFF and unplug the freezer.
2. Remove the front lower panel cover (Fig. 7) to access the
controller.
3. Locate jumper wires connecting pins #9 and #11 (Fig. 8) and
disconnect.
4. Reinstall the front lower panel cover.
5. Plug in the freezer and return the power switch to ON.
"Sleep" Function –––––––––––––––––––––––––––––––––––––––––––––––––––
You may not want the Follett temperature display when using a third-party temperature monitoring system with
its own temperature display. You can put the Follett controller "to sleep" to avoid confusion. The compressor icon
remains illuminated when the compressor is running.
1. Press BOTTOM RIGHT button to put display to sleep.
2. Press BOTTOM RIGHT button to return to display mode.
6
FZR Undercounter Freezer
Fig. 7
Fig. 8
C/F Jumper Wire
1
2
3
4
5
6 7
8
programming key
Probe
9 10 11 12
11 12
!
•
•
•
•
•
Controller
(accessory)