- ページ 12

ラボラトリー機器 Daihan Scientific MS-MP8のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Daihan Scientific MS-MP8 15 ページ。 Digital multi-point magnetic stirrers

ページを印刷する

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall

3. Product Usage

3.3 Usage Instructions

Please proceed as described in this manual when operating this product.

1. Power-On: Turn on the power switch, then the MS-MP4/8 get into RPM mode.

Mode Selection: MS-MP4/8 series have 3 different Modes including default Mode. You can

change the mode by push MODE switch ⑦. 3 Modes are; (1) Set Stirring Mode, (2) Set

Timer Mode and (3) Locking Mode. Default mode is the (1) Set Stirring Mode.

Power On

MODE

button

In <fig. 2>, ②Set Value and ③Measured Value have different meaning for each operation

mode. It is shown in the following <Table 1>.

<Table 1> the meaning of digit by mode

Setting Mode

Set Stirring Mode

Set Timer Mode

Locking Mode

2. Set Stirring (RPM) Mode

A. After you turn on the power and select the RPM mode, you can see the Set Value is

zero or non-zero on LCD panel.

If the Set Value is non-zero, it means someone has saved a set-value previously.

You can use the saved value or you can modify the value by turning the jog-

shuttle. Simply by clicking jog-shuttle, the unit begins to operate with the set RPM.

DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer

Stirring Mode

Locking Mode

Set Value

Set(Saved) Speed

(RPM)

Set(Saved) Time

Current Speed

MODE

button

Timer Mode

MODE

button

Measured Value

Current Speed

(RPM)

Time remained

Control target

Stirring Speed

(RPM)

Operation time

Display only

12 / 15