- ページ 10

計測機器 Amprobe TMA40-AのPDF 要約版ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amprobe TMA40-A 12 ページ。 Airflow anemometer

Amprobe TMA40-A 要約版ユーザーマニュアル
-insert the software Cd into Cd-RoM driver
-install the USb driver first
-install the software follow the on-screen instructions
-open the program
-Click the "port" from main screen and input the right comm. port.
-Click as follow to download the memory
1.
Click to download manually recorded data.
2.
Click to download automatically recorded data
3.
Click to download both manually & automatically recorded data

TROUBLESHOOTING

Power on but no display
Make sure the time of pressing "on/off" key is more than 0.2 seconds.
Check the batteries are in place and make sure they are at good contact and correct polarity.
Replace the batteries and try again .
Display disappear
Check whether the low battery indicator is displayed on or before display disappears. if yes,
replace the batteries .
Error code:
e2. problem : Meter value is underflow .
e3. problem : Meter value is overflow.
e4. problem: Calculated source value occurs error.
9