Amprobe TMA40-A Skrócona instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przyrządy pomiarowe Amprobe TMA40-A. Amprobe TMA40-A 12 stron. Airflow anemometer
Drukuj stronę
-insert the software Cd into Cd-RoM driver
-install the USb driver first
-install the software follow the on-screen instructions
-open the program
-Click the "port" from main screen and input the right comm. port.
-Click as follow to download the memory
1.
Click to download manually recorded data.
2.
Click to download automatically recorded data
3.
Click to download both manually & automatically recorded data
TROUBLESHOOTING
Power on but no display
•
Make sure the time of pressing "on/off" key is more than 0.2 seconds.
•
Check the batteries are in place and make sure they are at good contact and correct polarity.
•
Replace the batteries and try again .
Display disappear
•
Check whether the low battery indicator is displayed on or before display disappears. if yes,
replace the batteries .
Error code:
•
e2. problem : Meter value is underflow .
•
e3. problem : Meter value is overflow.
•
e4. problem: Calculated source value occurs error.
9