- ページ 4

温度コントローラー Carbolite 201のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Carbolite 201 8 ページ。
Carbolite 201 にも：操作説明 (4 ページ)

201 Controller

Stopping and Starting Control

It is possible to stop and start the controller without altering the setpoint. Press Scroll

m-A

legend

(manual/auto) appears. In the 201, manual means "off" and auto means "on". Press

Down

or Up

to change between manual and auto (off and on) as required.

2.6

Altering the Ramp Rate

It is possible to limit the rate of heating by setting a ramp rate. Press Scroll

SPrr

(SetPoint ramp rate) is displayed. Use Down

The ramp rate sets the maximum rate of heating or cooling in degrees per minute. A value of

cancels the ramp rate, allowing heating and cooling at the maximum rate. When this feature is in

use, there is a "working setpoint" which can be viewed at any time by scrolling to

pressing

Fig 1 and fig 2 indicate the possible difference between running without and with a ramp-to-

setpoint value (depending on the load and the value used).

once to show the current on/off state:

mAn

Auto

for off, and

or Up

to display and adjust the value.

until the

for on. Press

until the legend

OFF

w.SP

and

MC07