- ページ 8

温度コントローラー Carbolite 3216 P1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Carbolite 3216 P1 20 ページ。 Type 3216

ページを印刷する

Programming

4 Setting up the controller

Before using the controller (or during its lifetime) certain parameters may have to be set,

depending on specific requirements. To do this the controller must be set to supervisor level

(Level 2) see section 3.4

4.1

Maximum Output Power Setting

until the display shows OP.HI <Output High>. Using Up

Press scroll

select the output power required as a percentage.

Depending on the furnace or oven model, the maximum output power setting OPHi may be

accessible or locked.

For Silicon Carbide heated furnaces, the parameter is accessible to allow compensation for

element ageing. Refer to the product manual for details.

In many models the maximum output power setting depends on the supply voltage, refer to

the product manual for details.

4.2

Customer ID.

A furnace or oven identification number can be entered if required. This maybe used to

identify one of many units, for production or quality control systems.

until the display shows ID <customer ID>. Using the Up

Press scroll

your own identification number. This can range from 1-9999.

4.3

Units

until the display shows units <Display Units>. Using the Up

Press scroll

select the required units.

Mnemonic

nonE

°C

°F

°K

PErc

4.4

Language

The scrolling text on the 3216 can be shown in different languages, this can only be set at

the factory and therefore must be specified at the time of placing an order.

4.5

Scrolling Text

If at any time the scrolling text is not required.

Press and hold the Page

Description

No units

(Default °C)

Celsius

Fahrenheit

Kelvin

for three seconds until "GOTO" is displayed

and Down

Down

enter

or Down

MC18-GB – v1.04