ページを印刷する
Getting Started with the Follett 6102
Link Modes
If you are using more that one 6102 scanner, it is important to remember
that a base unit can be linked to only on scanner at a time. To help optimize
your usage of multiple scanners, your Follett 6102 Cordless Scanner system
offers two modes of link control: Open Link Mode and Locked Link Mode.
Open Link Mode
In this mode, if a scanner is placed in a base unit that it was not previously
linked with, the base unit will clear any previously linked scanner and
automatically link to the new scanner. This can offer the versatility of placing
a scanner in any base unit, but will cause the scanner originally linked to that
base unit to become inoperable until it is linked with another base unit. To set
the Open Link Mode, scan the barcode below.
Locked Link Mode
This mode locks the base unit to a single scanner and will not allow it to
link to a different scanner if one is placed in the base. The base unit will
still charge the scanner, but it will not link to it. This mode offers the greater
assurance that a scanner will not be accidentally unlinked from its base unit.
To set this mode, scan the barcode below.
©2014 Follett School Solutions, Inc. All Rights Reserved.
Page 5 of 8