- ページ 10

試験装置 Amprobe BT-120のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amprobe BT-120 10 ページ。 Breaker tracer
Amprobe BT-120 にも：ユーザーマニュアル (12 ページ)

MAINTENANCE AND REPAIR

If there appears to be a malfunction during the operation of the tracer, the

following steps should be performed in order to isolate the cause of the

problem.

1. Check the battery. Replace the battery immediately if the Receiver LED

doesn't turn ON.

2. Review the operating instructions for possible mistakes in operating

procedure.

Except for the replacement of the battery, repair of the tracer should be

performed only by a Factory Authorized Service Center or by other qualified

instrument service personnel.

The front panel and case can be cleaned with a mild solution of detergent and

water. Apply sparingly with a soft cloth and allow to dry completely before

using. Do not use aromatic hydrocarbons or chlorinated solvents for cleaning.

.800.561.8187

www.

.com