- ページ 8

試験装置 Amprobe BT-120のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amprobe BT-120 10 ページ。 Breaker tracer
Amprobe BT-120 にも：ユーザーマニュアル (12 ページ)

Using the BT-LFA Incandescent Light Fixture Adapter (BT-250 only)

1. Remove the light bulb exercising the proper caution.

2. Screw in the BT-LFA adapter.

3. Plug the Transmitter into the BT-LFA (Figure 3).

4. Preform scan following directions in step 4 under "Operation."

Using the BT-VLA High Voltage Leads Adapter (BT-250 only)

The BT-250 Transmitter can be used alone on 110V circuits. For circuits up to

250V or exposed circuits, use the BT-VLA and follow the directions listed below.

1. Plug Transmitter into high voltage lead receptacle. Be sure that the

Transmitter is completely seated and that no part of the Transmitter

prongs are exposed.

2. Attach the high voltage leads to the terminal or conductor while

exercising extreme caution (Figure 4).

3. Preform scan following directions in step 4 under "Operation."

.800.561.8187

Figure 3

Figure 4

www.

.com