- ページ 9

スピーカーシステム DAIICHI VOLVO EICHER MP230 BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DAIICHI VOLVO EICHER MP230 BT 17 ページ。

Settings

1. SOUND Level

Use the VOLUME +/- button to adjust the volume. Max. Sound level: 40

2. BASS Adjustment

Press the VOLUME button repeatedly until "BAS 00" appears on the display. Use

VOLUME +/- to change the setting. Bass control is not available when EQ is on.

3. TREBLE Adjustment

Press the VOLUME button repeatedly until "TRE 00" appears on the display. Use

VOLUME +/- to change the setting. Treble control is not available when EQ is on.

4. BAL (Speaker Balance)

Press the VOLUME button repeatedly until "BAL 00" appears on the display, then

use the VOLUME / +/- button to adjust the balance between the left and right

speakers.

5. FADE (Front-Rear Speaker Balance)

Press the VOLUME button repeatedly until "FAD 00" appears on the display, then

use the VOLUME +/- button to adjust the balance between the front and rear

speakers.

6. LOUD (Loudness Control)

Press the VOLUME button repeatedly until "LOUD OFF" appears on the display.

Turn the VOLUME +/- control to select between ON and OFF.

7. EQ (Equalizer Function Preset)

Press the VOLUME button repeatedly until "EQ OFF" appears on the display,

then turn the VOLUME +/- button to select from the EQ sound effects. The order

of the equalizer settings will be as follows: EQ OFF / CLASS / ROCK / POP

8. DX / LOCAL (Broadcast Signal Quality Control)

In FM radio mode, press the SOUND button repeatedly until "DX" appears on the

display. Turn the VOLUME +/- knob to select between "LOCAL" or "DX". The local

and remote broadcast setting can improve the radio broadcast quality depending on

the location.

9. MONO / STEREO (Broadcast Sound Quality Control)

In FM radio mode, press the VOLUME button repeatedly until "STEREO" appears on

the display. Turn the VOLUME +/- knob to select between STEREO or MONO. To

improve the broadcast quality of remote stations, the "MONO" operation can be

selected, which may slightly reduce the broadcast noise.

10.

CLOCK Setting

In any menu, press and hold the VOLUME button until the time display appears.

After the time comes, press and hold the VOLUME button again, turn VOLUME

+/- to set the time, press the VOLUME button again and set the minute.