DAIICHI VOLVO EICHER MP230 BT Kullanıcı Kılavuzu - Sayfa 9
Hoparlör Sistemi DAIICHI VOLVO EICHER MP230 BT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAIICHI VOLVO EICHER MP230 BT 17 sayfaları.
Sayfayı Yazdır
Settings
1. SOUND Level
Use the VOLUME +/- button to adjust the volume. Max. Sound level: 40
2. BASS Adjustment
Press the VOLUME button repeatedly until "BAS 00" appears on the display. Use
VOLUME +/- to change the setting. Bass control is not available when EQ is on.
3. TREBLE Adjustment
Press the VOLUME button repeatedly until "TRE 00" appears on the display. Use
VOLUME +/- to change the setting. Treble control is not available when EQ is on.
4. BAL (Speaker Balance)
Press the VOLUME button repeatedly until "BAL 00" appears on the display, then
use the VOLUME / +/- button to adjust the balance between the left and right
speakers.
5. FADE (Front-Rear Speaker Balance)
Press the VOLUME button repeatedly until "FAD 00" appears on the display, then
use the VOLUME +/- button to adjust the balance between the front and rear
speakers.
6. LOUD (Loudness Control)
Press the VOLUME button repeatedly until "LOUD OFF" appears on the display.
Turn the VOLUME +/- control to select between ON and OFF.
7. EQ (Equalizer Function Preset)
Press the VOLUME button repeatedly until "EQ OFF" appears on the display,
then turn the VOLUME +/- button to select from the EQ sound effects. The order
of the equalizer settings will be as follows: EQ OFF / CLASS / ROCK / POP
8. DX / LOCAL (Broadcast Signal Quality Control)
In FM radio mode, press the SOUND button repeatedly until "DX" appears on the
display. Turn the VOLUME +/- knob to select between "LOCAL" or "DX". The local
and remote broadcast setting can improve the radio broadcast quality depending on
the location.
9. MONO / STEREO (Broadcast Sound Quality Control)
In FM radio mode, press the VOLUME button repeatedly until "STEREO" appears on
the display. Turn the VOLUME +/- knob to select between STEREO or MONO. To
improve the broadcast quality of remote stations, the "MONO" operation can be
selected, which may slightly reduce the broadcast noise.
10.
CLOCK Setting
In any menu, press and hold the VOLUME button until the time display appears.
After the time comes, press and hold the VOLUME button again, turn VOLUME
+/- to set the time, press the VOLUME button again and set the minute.
7