- ページ 5
コントロールユニット AMS AS5600のPDF マニュアルをオンラインで閲覧またはダウンロードできます。AMS AS5600 14 ページ。 12-bit programmable contactless potentiometer
AMS AS5600 にも： 操作マニュアル (12 ページ), ユーザーマニュアル (13 ページ), 操作マニュアル (10 ページ)
ページを印刷する
- 1. Table of Contents
- 1. 1 Introduction
- 1. Kit Content
- 2. 2 Board Description
- 3. 3 Software
- 3. Labview
- 3. Using the Arduino IDE
- 3. Installing the Arduino Library
- 3. Reading out the AS5600 Sensor
- 4. 4 AS5600-POTUINO Hardware
- 4. AS5600-POTUINO Schematics
- 4. AS5600-POTUINO PCB Layout
- 5. 5 Ordering & Contact Information
- 6. 6 Copyrights & Disclaimer
AS5600 Adapter Board
3
Software
Custom firmware source code can be generated using the Arduino IDE. An example code and
Arduino library is available for reference. In addition, the AS5600 LabVIEW Evaluation GUI software
can be used to readout and configure the AS5600.
3.1
LabVIEW
The AS5600 LabVIEW Evaluation GUI supports the Arduino UNO. The latest version of the
software can be downloaded from the ams webpage.
Before the Arduino UNO can be used together with the POTUINO shield the LabVIEW interface
firmware has to be flashed onto the Arduino. Easiest way to do this is to download the free software
tool XLoader.
Figure 3: XLoader for flashing the Arduino UNO
Choose the LIFA_Base_AS5600.hex file which is also available for download from the ams
webpage. Then choose the Uno(ATmega328) in the Device dropdown menu. After this choose the
correct COM port which can easily be checked in the Windows Device Manager and finally click
Upload.
ams Eval Kit Manual, Confidential
[v1-0] 2015-Jan-21
Page 5
Document Feedback