- ページ 7

冷蔵庫 Electrolux 241868902のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux 241868902 42 ページ。 Side-by-side refrigerator

ページを印刷する

Getting through narrow spaces

If your refrigerator will not fit through an entrance area, you can reduce its size by removing the doors.

Check first by measuring the entrance.

Required Tools

You will need the following tools:

Top Hinge

Cover Rear

Cover Front

Screw

Top

Hinge

Bottom

Screw

Hinge

Screw

To prepare for removing the doors:

1 Make sure the electrical power cord is unplugged from the wall outlet.

2 Open both doors and remove the toe grille (as explained in the

Installation Instructions that came with your appliance).

3 Remove any food from the door shelves.

4 Close the doors.

To remove the refrigerator top hinge cover:

1 Remove the three screws from each cover over the top door hinges.

2 Lift hinge cover straight up and off.

To remove the refrigerator door:

1 Trace lightly around the door's top hinge with a pencil. This makes

reinstallation easier.

2 Remove the two screws from the top hinge. Lift the door off of the

bottom hinge and set it aside.

3 Remove the two bottom hinge screws and hinge if necessary.

Adjustable Hinge

(some models)

To reinstall the refrigerator door, reverse the above steps.

Removing The Doors

Tools Necessary:

AND

Phillips Head

™

Non-Adjusting Hinge

(some models)

Socket

Adjustable

Wrench Set

Wrench

CAUTION

Be sure doors are

set aside in a secure

position where they

cannot fall and cause

personal injury.

3/8" Fixed

Wrench