Electrolux 241868902 사용 및 관리 매뉴얼 - 페이지 7
{카테고리_이름} Electrolux 241868902에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 241868902 42 페이지. Side-by-side refrigerator
페이지 인쇄
Getting through narrow spaces
If your refrigerator will not fit through an entrance area, you can reduce its size by removing the doors.
Check first by measuring the entrance.
Required Tools
You will need the following tools:
Top Hinge
Top Hinge
Cover Rear
Cover Front
Screw
Screw
Top
Hinge
Bottom
Screw
Hinge
Screw
To prepare for removing the doors:
1 Make sure the electrical power cord is unplugged from the wall outlet.
2 Open both doors and remove the toe grille (as explained in the
Installation Instructions that came with your appliance).
3 Remove any food from the door shelves.
4 Close the doors.
To remove the refrigerator top hinge cover:
1 Remove the three screws from each cover over the top door hinges.
2 Lift hinge cover straight up and off.
To remove the refrigerator door:
1 Trace lightly around the door's top hinge with a pencil. This makes
reinstallation easier.
2 Remove the two screws from the top hinge. Lift the door off of the
bottom hinge and set it aside.
3 Remove the two bottom hinge screws and hinge if necessary.
Adjustable Hinge
(some models)
To reinstall the refrigerator door, reverse the above steps.
Removing The Doors
Tools Necessary:
AND
Phillips Head
™
Non-Adjusting Hinge
(some models)
OR
OR
Socket
Adjustable
Wrench Set
Wrench
CAUTION
Be sure doors are
set aside in a secure
position where they
cannot fall and cause
personal injury.
7
3/8" Fixed
Wrench