- ページ 10

食器洗い機 Bosch Ascenta SHE4AM12UのPDF 修理指導をオンラインで閲覧またはダウンロードできます。Bosch Ascenta SHE4AM12U 27 ページ。
Bosch Ascenta SHE4AM12U にも：修理指示 (50 ページ)

Pump access

Pump

Sump

4.3

Float

The float is a safety device which starts the drain pump if there's

too much water in the tank.

Float

702_58300000130262_ara_en_b

Sump

Pump

SHE4A

M /

Float cover

(on inside

of tank)

4.4

The BLDC 9-vane drain pump has variable speed and direction.

The power control module controls speed and direction, detects

end of draining and blocked rotor and corrects locked rotor

conditions.

The dishwasher won't run if the drain pump is

disconnected or disabled.

To remove the drain pump, rotate it clockwise and pull it out.

4.5

Unlike prior dishwashers, Ascenta dishwashers use a common

water inlet and condensation system. Instead of feeding water

into the bottom of the tank, dishwashers fill into the left side of the

tank. Instead of condensation exiting from the right side of the

tank, it exits the left side of the tank through the water inlet.

There are three hoses connected to the water inlet system, the

water inlet hose (from the water inlet valve), condensation

(breather) hose and internal drain hose. The internal drain hose

has a factory made high loop (~ 15" above the floor) and

connects to the external customer drain hose.

Ascenta dishwashers use a time-fill.

Page 10 of 27