Bosch Ascenta SHE4AM12U 수리 지침 - 페이지 10
{카테고리_이름} Bosch Ascenta SHE4AM12U에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Ascenta SHE4AM12U 27 페이지.
Bosch Ascenta SHE4AM12U에 대해서도 마찬가지입니다: 수리 지침 (50 페이지)
페이지 인쇄
Pump access
Pump
Sump
4.3
Float
The float is a safety device which starts the drain pump if there's
too much water in the tank.
Float
702_58300000130262_ara_en_b
Sump
Pump
SHE4A
M /
Float cover
(on inside
of tank)
4.4
Drain pump
The BLDC 9-vane drain pump has variable speed and direction.
The power control module controls speed and direction, detects
end of draining and blocked rotor and corrects locked rotor
conditions.
The dishwasher won't run if the drain pump is
disconnected or disabled.
To remove the drain pump, rotate it clockwise and pull it out.
4.5
Water inlet / condensation system
Unlike prior dishwashers, Ascenta dishwashers use a common
water inlet and condensation system. Instead of feeding water
into the bottom of the tank, dishwashers fill into the left side of the
tank. Instead of condensation exiting from the right side of the
tank, it exits the left side of the tank through the water inlet.
There are three hoses connected to the water inlet system, the
water inlet hose (from the water inlet valve), condensation
(breather) hose and internal drain hose. The internal drain hose
has a factory made high loop (~ 15" above the floor) and
connects to the external customer drain hose.
Ascenta dishwashers use a time-fill.
Page 10 of 27