- ページ 6
冷蔵庫 Electrolux WRT5B1EW2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux WRT5B1EW2 21 ページ。 Top mount refrigerator
Door Removal and Reversal Instructions
Door
Stor
Sc{eW--Too "_\_
'_mge
Scre,_
Phi
los
neua
or
QuFJdrex
n@Qc_
_c fewc_rlv@
erich Sot
_OlUSlODe
VWGr 3H
AW
J
Cabinet
Hole
Plugs
Hinge
Hole
DOOR
REMOVAL
AND
REVERSAL
INSTRUCTIONS:
_'_--
Top Hi,,ge
NOTE: If you have stainless steel doors -- go to the Removing Stainless
SC_'eW$
___
_
Cover
Steel Doers and Handles Section on page 9.
bpH_ng_
NOTE: The direction in which you r refrigerator doors open @oor swing)
can be reversed, from left to right or right to left, by moving the door
_ndm_ _o_
hinges from one side to the other. Reversing the door swing should be
performed by a qualified person.
IMPORTANT: Before you begin_ turn the reffig erator temperature control
//
rage
Bottom
Hinge
1
Remove toe grille and top hinge cover,
2.
Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pro, Set door aside
3
Unscrew center hinge pin using adjustable wrench and save for
reassembiy, Ensure plastic washer stays on hinge pin,
4
Lift refrigerator door off of bottom hinge and set aside,
5,
Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to
slide out, Tighten screws.
6,
Loosen two outside screws on opposite side of refrigerator, remove
inside screw and install center hinge,
7.
Remove two screws on bottom hinge with 3/8" socket wrench
8,
install bottom hinge on opposite side with the two screws removed
from step 7,
9,
Unscrew bottom hinge pin using adjustable wrench, Move hinge pin
to other hob in hinge and tighten with adjustable wrench
10, Reverse door handles, see instructions on next page!
11. Move freezer and refrigerator door stops to opposite side, Before
starting screws, use an awl to puncture the foam,
12, Position refrigerator door onto bottom hinge pin and screw center
hinge pin through center hinge into top of door, Close refrigerator door
to help align hinge hob,
13, Tighten center hinge pin with adjustable wrench,
14, Remove cabinet and hinge hob plugs and move to opposite side,
15, Lower freezer door onto center hinge pin
16, Close freezer door, Have an assistant lift up on opposite side of door
while tightening screws to install top hinge,
17, Replace toe grille and top hinge cover
18, Plug in electrical power cord and tu m refrigerator temperature control
to center position, Adjust setting as necessary,