- ページ 7
冷蔵庫 Electrolux WRT5B1EW2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux WRT5B1EW2 21 ページ。 Top mount refrigerator
ページを印刷する
Door Removal
and Reversal
instructions
(continued)
NOTE: Some models have "pocket" handles which are recessed into the sides of the door. On these models, only the
hinges will need to be reversed.
TO REMOVE
FREEZER
HANDLE:
, Handbs may be easier to reverse whib doors are off..
1
Remove two screws attaching handle to bottom of freezer door
2
Remove short tnm puece by sliding trim straight up and off of handle
bracket.
3
Remove screw attaching top of handle to door.
4
Magnetic NamepJate ModeJs: Gently pry magnetic nameplate frame from
door. Remove nameplate from its frame turn frame upside down and
install in old handb hobs. insert magnetic nameplate into frame.
Serf-Adhesive
Nameplate ModeJs: Gently peel off nameplate from door
and reapply over old handb hobs.
TO ATTACH
FREEZER
HANDLE:
1
Reinstall handle on opposite side. usin g same hob as nameplate,
2
Attach handle to bottom of door,
8
Slide trim piece straight down onto handle bracket,
I
,_
l-
Sere_
£A1hp;2,"/
Screw----_,_
_some models_
(some models
TO REMOVE
FREEZER
HANDLE:
(Handles may be easier to reverse while doors are off.)
1.
Remove two screws attaching handle to bottom of freezer door.
2.
Swing bottom of handle away from the door and slide handle straight up
and off of dovetail button.
3.
Remove screw and dovetail button and install on other side, using the
4.
Magnetic NamepJate Modete: Use putty knife to gently pry magnetic
nameplate frame from door. Remove nameplate from its frame, turn frame
upside down and install in old handle hobs. insert magnetic nameplate
into frame.
Self-Adhesive
Nameplate Models: Use putty knife to gently peel off name
plate from door and reapply over old handle hobs.
TO ATTACH
FREEZER
HANDLE:
1.
Start with handle offset away from door. Place top of handle over dovetail
button, swing handle into an upright position and pull downward, locking it
into place.
2.
Secure bottom of handle with two screws removed earlier.
TO REMOVE
FREEZER
HANDLE:
(Handles may be easier to reverse while doors are off.)
1.
Remove two screws attaching handle to bottom of freezer door.
2.
Remove button plug using edge of putty knife.
3.
Remove screw on side of freezer door and remove handle.
TO ATTACH
FREEZER
HANDLE:
1.
Secure side of handle to door and replace button plug.
2.
Secure handle to bottom of door.