- ページ 9

メディア・コンバーター DRAKE ENCODER HOST EH244のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DRAKE ENCODER HOST EH244 11 ページ。 Encoder host
DRAKE ENCODER HOST EH244 にも：取扱説明書 (20 ページ)

ページを印刷する

Figure 5: EH244 Firmware Update Tab

Important Notes

EAS Notes

When the EH244 is running in an EAS mode, the

emergency alert state is entered when the two termi-

nals on the rear panel labeled EAS are connected

together via an external contact closure. EAS re-

ceivers should provide this contact closure output,

which will be wired to the terminal block on the rear

of the EH244.

IMPORTANT NOTES

If the EH244 is using the Slot 6 or Slot 6 +

SCTE 18 EAS modes, ensure that the bit rates of

the SDE24EAS encoder's two output channels are at

least as low as all of the other encoders in the entire

system. This guarantees that, during an EAS event,

the output bit-rates of the system are not exceeded

by the replacement video channels.