DRAKE ENCODER HOST EH244 사용 설명서 - 페이지 9

{카테고리_이름} DRAKE ENCODER HOST EH244에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DRAKE ENCODER HOST EH244 11 페이지. Encoder host
DRAKE ENCODER HOST EH244에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄
DRAKE ENCODER HOST EH244 사용 설명서
Figure 5: EH244 Firmware Update Tab

Important Notes

EAS Notes
When the EH244 is running in an EAS mode, the
emergency alert state is entered when the two termi-
nals on the rear panel labeled EAS are connected
together via an external contact closure. EAS re-
ceivers should provide this contact closure output,
which will be wired to the terminal block on the rear
of the EH244.
IMPORTANT NOTES
If the EH244 is using the Slot 6 or Slot 6 +
SCTE 18 EAS modes, ensure that the bit rates of
the SDE24EAS encoder's two output channels are at
least as low as all of the other encoders in the entire
system. This guarantees that, during an EAS event,
the output bit-rates of the system are not exceeded
by the replacement video channels.
9