- ページ 29
洗濯機 Bosch 800 WFMC8400UCのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch 800 WFMC8400UC 35 ページ。 Nexxt 800 series washer
Bosch 800 WFMC8400UC にも： 取扱説明書 (24 ページ), インストレーション・インストラクション (2 ページ), エネルギー・マニュアル (2 ページ)
ページを印刷する
Troubleshooting of Minor Faults
d
WARNING
TO AVOID
RISK OF ELECTRIC SHOCK!
Repairs should only be carried out
by an authorized technician.
Fault
The door cannot be
The door cannot be
opened.
opened.
Door cannot be opened,
even though the appliance
has been switched off and
on again.
Door cannot be opened,
even though the appliance
has been switched off and
on again.
Program continues running,
even though the appliance
has been switched off and
on again.
Appliance cannot be
operated. "Child lock
activated" as indicated in
the display field.
Control lights do not light
Control lights do not light
up.
up.
Program does not start.
Start/Pause indicator light
flashes.
Program does not start.
"Check Door !" indicated in
the display field.
"Press start" is indicated in
the display field.
If repairs are necessary, and you
d
cannot eliminate the fault yourself with
the aid of the following table:
Turn the program selector to Off.
q
Disconnect the washing machine
q
from the power outlet.
Turn off the water taps.
q
Call Customer Service
q
(refer to Page 32).
Possible cause
Child lock activated.
Power failure.
Program is running and/or the door is locked for safety
reasons.
Plug is loose or not inserted.
Program selector turned to Off before end of program.
Child lock activated.
For safety reasons the door has been locked because the
water level, temperature or drum speed is too high.
Child lock activated.
Child lock activated.
A fuse has blown.
A fuse has blown.
Power failure.
Appliance is in energy saving mode.
This is not a fault.
Start/Pause button not pressed.
Door not closed properly.
End time selected but still not activated by pressing the
Start/Pause" button.
Action
Deactivate child lock; see Page 24
An interrupted program will be resumed when power is
restored. If the laundry is to be removed during a power
failure, call Customer Service
(refer to Page 32).
Wait until the program ends; see Page 25.
Eliminate the cause.
Select a program.
Deactivate child lock, see Page 24.
See "Adding to the laundry/Interrupting the program",
Page 25 .
Deactivate child lock; see Page 24.
Deactivate child lock; see Page 24.
Reset circuit breaker.
Call Customer Service if this fault recurs.
An interrupted program will be resumed when power is
restored. If the laundry is to be removed during a power
failure, call Customer Service
(refer to Page 32).
Press the Select button; energy saving mode is
terminated.
Press the Start/Pause button.
Check whether laundry is trapped in door.
Close the door (a click should be heard).
Program continues.
Press the Start/Pause button.
29