投影スクリーン Draper CinefoldのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Draper Cinefold 2 ページ。 Cinefold portable projection screen
Draper Cinefold にも：仕様 (1 ページ), 組み立て説明書 (2 ページ)

ページを印刷する

Cinefold Portable Projection Screen by Draper

Read instructions through completely before proceeding; retain for

future reference.

Handle viewing surface with care; do not allow it to come in contact

with sharp or dirty objects.

Use Handy Cranks provided; failure to do so may lead to screen

damage.

Make sure screen is level.

Do not write on viewing surface.

Frame/Screen Assembly

Open carrying case and remove pouch containing screen

surface, divider, and three aluminum assemblies. The

largest package is the frame. Unwrap and unfold it

completely in one direction only, locking all hinges. Frame

should lie with snaps facing up.

Remove surface from its envelope. With male snaps at

bottom, snap surface to frame. Begin at the 4 corners, and

work across the bottom, up the sides, and across the top.

Make sure snaps are secure.

Please note: For steps 3-5, screen should remain on floor or

table, with surface facing up. Carefully lift screen from floor or

table to complete each step.

Lock corner braces.

Unfold leg assemblies and lock hinges. Check that

adjustment knob is in the hole desired (upper for vertical

screen position, lower for keystone elimination). DO NOT

unfold feet at this time.

Attach legs to back side of vertical frame sections, as

indicated by the color coded markings, using Handy

Cranks. For standard screen height, match colored tapes

exactly. Height is adjustable in 6" increments.

Raise Cinefold to a vertical position and unfold feet. Tighten

adjustment knobs to maintain legs at desired angle. If your

screen includes Heavy-Duty Legs, unfold and lock the

extensions on the backs of the feet, hinge up to the backs of

the leg, and attach with Handy Crank.

If Anti-Sway stabilizers are supplied with your screen, refer to

illustration and attach with Handy Cranks.

A Note About Surfaces

Always fold with snaps face-to-face. Do not permit screen

fabric to contact border material or snaps when folded. Store in

pouch provided, and retain case divider to separate pouch

from aluminum parts when in case.

Take care at all times not to permit Cinefold viewing surface to

contact any dusty or dirty area, nor any varnished or painted

object.

When necessary, clean Cinefold viewing surface with mild

soap and water. USE NO SOLVENTS! Surface must be

completely dry before folding.

411 S. Pearl St., Spiceland, IN 47385 USA 765-987-7999 fax 765-987-7142

e-mail [email protected]

Assembly Instructions

Caution

www.draperinc.com

Printed in U.S.A.

Frame

Handy Crank

Standard T-Leg

Anti-sway stabilizers

optional with HD legs

Frame

Handy Crank

Standard T-Leg

Heavy duty legs optional

Hinges and

hinge locks

Viewing

Surface

2" Min.

44" Max.

KE Adjustment

Knob

Snaps

Viewing

Surface

Bottom row of snap

studs to accept skirt.