投影スクリーン Draper CinefoldのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Draper Cinefold 2 ページ。 Cinefold portable projection screen
Draper Cinefold にも：仕様 (1 ページ), 組み立て説明書 (2 ページ)

ページを印刷する

Cinefold Portable Projection Screen by Draper

➀ Read instructions through completely before proceeding; retain for future

reference.

➁ Handle viewing surface with care; do not allow it to come in contact with

sharp or dirty objects.

➂ Use Handy Cranks provided; failure to do so may lead to screen damage.

➃ Make sure screen is level.

➄ Do not write on viewing surface.

Frame/Screen Assembly

➀ Open carrying case and remove pouch containing screen

surface, and three aluminum assemblies. The largest

package is the frame. Unwrap and unfold it completely in

one direction only, locking all hinges. Frame should lie with

snaps facing up.

➁ Remove surface from its envelope. With male snaps at bot-

tom, snap surface to frame. For easier surface attachment,

start in one corner, then work your way around the frame.

Make sure snaps are secure.

Please note: For steps 3-5, screen should remain on ﬂ oor or

table, with surface facing up. Carefully lift screen from ﬂ oor or

table to complete each step.

➂ Lock corner braces.

➃ Unfold leg assemblies and lock hinges. Check that ad-

just ment knob is in the hole desired (upper for vertical

screen position, lower for keystone elimination). DO NOT

unfold feet at this time.

➄ Attach legs to back side of vertical frame sections, as indi-

cated by the color coded markings, using Handy Cranks.

For standard screen height, match colored tapes exactly.

Height is adjustable in 6" increments.

➅ Raise Cinefold to a vertical position and unfold feet. Tighten ad just ment

knobs to maintain legs at desired angle. If your screen includes Heavy-

Duty Legs, unfold and lock the extensions on the backs of the feet, hinge

up to the backs of the leg, and attach with Handy Crank.

➆ If Anti-Sway stabilizers are supplied with your screen, refer to illustration

and attach with Handy Cranks.

Caution: Beware

of pinch points.

A Note About Surfaces

➀ Always fold with snaps face-to-face. Do not permit screen fabric

to contact border material or snaps when folded. Store in pouch

provided.

➁ Take care at all times not to permit Cinefold viewing surface

to contact any dusty or dirty area, nor any varnished or painted

object.

➂ When necessary, clean Cinefold viewing surface with mild

soap and water. USE NO SOLVENTS! Surface must be com-

pletely dry before folding.

Form Cinefold_Inst07

Assembly Instructions

Caution

Anti-sway stabilizers

optional with HD legs

Printed in U.S.A.

Frame

Handy Crank

Standard T-Leg

Caution: Make sure all hinges and joints are locked

before raising screen to standing position.

Caution: Make sure screen is

placed on level surface.

Frame

Handy Crank

Standard T-Leg

Heavy duty legs optional

Hinges and

hinge locks

Viewing

Surface

2" Min.

44" Max.

KE Adjustment

Knob

Snaps

Viewing

Surface

Bottom row of snap

studs to accept skirt