- ページ 3
投影スクリーン Draper EnvoyのPDF 取付・取扱説明書をオンラインで閲覧またはダウンロードできます。Draper Envoy 3 ページ。 Electric projection screen
Draper Envoy にも： 取付・取扱説明書 (3 ページ), 取付・取扱説明書 (3 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (2 ページ), 取付・取扱説明書 (3 ページ)
ページを印刷する
Envoy by Draper
Back of wall switch.
Please Note: Although both
Dry Contact and Data Cable
connections are shown, you
should only use one connec-
tion type per motor.
ILT Switch-to-Motor—Dry Contacts or Data Cable connection
Motor Data Cable
plugged in here
U
D
C
5V
P
O
O
W
M
N
M
O
N
External Low Voltage and Remote Control
Two-Way Serial Communication (RS232) with MC1
See separate Serial Communication-RS232 Instruction
sheet for enabling RS232 with the MC1.
Program LED
Fuse
RS232 Data FROM Control System
RS232 Data TO Control System
Signal Ground & Manual Switch Common
Manual Switch Down
Manual Switch Up
Eye Port for IR Eye. For RF Receiver or LED
MC1
Wall Switch, a Splitter and a Power Supply
is required. Plug RF Receiver or LED Wall
Switch and Power Supply into splitter, then
run cable from Splitter to MC1 Eye Port.
www.draperinc.com
UP 5V COM DWN
White-Common to screen & 110-120V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110-120V AC-Hot
Black-to 110-120V AC-Hot
Green-Ground
Dashed wiring by electrician
Low voltage wiring by others
Eye Port for IR Eye, RF Receiver or LED
Wall Switch. For more than one of
these, a splitter is required.
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Aux Port for connecting additional LVC-III
modules (up to six total can be linked-
connect from Aux to Eye).
White-Common to screen & 110-120V AC Neutral
Red-to Screen (directional)
Brown-to Screen (directional)
Black-Hot to 110-120V AC
Green/Yellow-Ground
Low Voltage Wiring by others
AC Wiring by electrician
(765) 987-7999
Page 3 of 3
Please Note: This Splitter/
Jack is located inside the
junction box of your Access
screen.
Data Cables to switches or
to additional motors can
be plugged into any of the
three open jacks. If this is a
"Case First, Screen Later"
installation, plug the motor
cable into the jack indicated
in the drawing.
Internal Screen Wiring
White (Common)
Red (Up)
Black (Down)
Green (Ground)
To
110-120V
Line
STOP
Location of key
operated on-off
switch if furnished
STOP
Control
Switches
24v DC
Internal Screen Wiring
White (Common)
Red (Up)
Black (Down)
Green/Yellow (Gnd)
To
110-120V
Line
STOP
Location of key
operated on-off
switch if furnished
STOP
Control
Switches
24v DC