ページを印刷する
9.
BASIC CIRCULAR SAW OPERATIONS
9.1 ON/OFF TRIGGER SWITCH – FIG.4
The trigger switch (16) is operated in conjunction with
a safety release button (15) so that it is not possible
to start the circular saw by accident.
– To start the saw, press the safety button (15) first
and then depress the trigger switch (16).
● Always wear ear defenders during use.
9.2 DUST EXTRACTION – FIG.5
Inhalation of dust particles can be detrimental to
health. The dust outlet (1) must be connected with a
dust extraction machine.
Note: Due to the outlet diameter, a size adaptation
may be necessary.
Warning! All wood dust (including dust from
composites like chipboards and fibre boards etc.) is
hazardous to health. It can affect the nose, the
respiratory system and the skin. For example MDF
(medium density fibreboard) which contains
formaldehyde is a known carcinogen. In addition to
the above measures a correctly fitted dust mask,
suitable for the activity and in accordance to the
relevant standard, must be worn.
9.3 CUTTING DEPTH ADJUSTMENT –
FIG.6
– To adjust the cutting depth, loosen the cutting
depth adjustment knob (12).
– Set the required cutting depth, using the depth
scale markings as a guide.
Note: For greater accuracy measure the tip of the
blade back to the base.
– Re-tighten the cutting depth adjustment knob (12)
when the required depth is set.
9.4 CUTTING ANGLE ADJUSTMENT –
FIG.7
To alter the angle between 0° to 45°, loosen the bevel
angle locking knob (8).
Note: The scale is a guide. If more accuracy is
required a protractor should be used off the underside
of the base against the blade.
– When the required angle is set, re-tighten the
bevel angle locking knob (8).
FIG.4
FIG.5
FIG.6
FIG.7
- 14 -
(1)
(15)
(16)
(12)
(8)