ページを印刷する
10. MAINTENANCE AND TROUBLESHOOTING
10.1 MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your
tool in good working condition.
The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum
the ventilation slots regularly.
10.2 TROUBLESHOOTING
Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
Problem
Machine does not
start.
Poor cutting
performance.
Saw vibrates.
11. OPTIONAL ACCESSORIES
11.1 OPTIONAL ACCESSORIES
A full range of accessories are available from Draper Tools.
Please visit our website for details: www.drapertools.com
Cause
1.
Fuse.
2.
Brushes worn.
3.
Other.
1.
Saw blade blunt.
2.
Saw blade incorrectly mounted.
3.
Incorrect saw blade selection.
1.
Saw blade distorted.
2.
Saw blade incorrectly mounted.
Remedy
1.
2.
3.
1.
2.
3.
1.
2.
- 16 -
Replace time delay fuse or
reset circuit breaker.
Have brushes replaced by an
authorised service centre.
Contact an authorised service
centre.
Replace saw blade.
Remove & refit saw blade as
per instructions.
Seek advice on suitable saw
blades.
Stop machine immediately &
replace blade.
Stop machine immediately.
Remove & refit saw blade as
per instructions.