- ページ 9

ソウ Draper CSM355のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper CSM355 16 ページ。 355mm dry metal cutting saw

OPERATION AND USE

USING CLAMP DEVICE TO SECURE

✶✌

WORKPIECE:

The clamp ✶✌ can now be pushed in or with-

✷✌

drawn to accommodate the workpiece. Tighten

clamp using the clamping handle ✷✌. Fig.8.

Fig.8.

ANGLE CUTTER:

✺✌

Loosen screw ✹✌ with the hex. key provided.

Then adjust fence ✺✌ to the required angle.

Tighten screw. Fence can be adjusted backwards

and forwards to meet your requirements. Fig.9.

IMPORTANT NOTICE:-

Always allow the blade to cut freely. Do not force

the blade through the workpiece. This may cause

the blade to chatter and jump which in turn will

cause the blade to wear unevenly, resulting in

poor cutting and damage to the TCT teeth.

✹✌

Fig.9.

SAFETY COVER WARNING:

Fig.10.

The moveable guard ✻✌ must be in the closed

position as shown before commencing cutting

Fig.10.

✻✌

- 8 -