- ページ 8

ソウ Draper CSM355のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper CSM355 16 ページ。 355mm dry metal cutting saw

ページを印刷する

OPERATION AND USE

ON - OFF SWITCH:

To turn the saw "ON" push in on switch lock key

✮✌ and depress switch trigger ✯✌. To turn the

saw "OFF" release switch trigger ✯✌. Fig.4.

LOCKING SWITCH IN THE "OFF"

POSITION:

IMPORTANT:We suggest that when the machine

is not in use, the switch be locked in the "OFF"

position using a padlock (Draper Stock No.64164)

✰✌ through the holes in the switch trigger ✯✌.

Fig.5.

ADJUSTING DOWNWARD TRAVEL OF BLADE:

The stop screw ✱✌ will limit the downward

travel of the blade. This is adjusted by loosening

lock nut ✳✌ and turning stop screw ✱✌ in or out

as desired. Then tighten lock nut ✳✌. Fig.6.

IMPORTANT NOTICE:-

item, always allow the blade to cut freely. Do not

force the blade through the workpiece. This will

result in poor cutting and damage to the TCT teeth.

The blade supplied is suitable for dry cutting mild

steel and angle iron. It is not capable of cutting hard

steel or stainless steel. Certain materials will require

the blade to be sharpened more frequently, for

example galvanised steel.

The arm casting ✴✌ contact with the stop screw

✱✌, limiting the downward travel of the blade

Fig.7.

NOTE: If the stop screw ✱✌ is set too low it will

cause the dust tray to be cut by blade. Always

keep the stop screw ✱✌ at a height to clear the

dust tray.

The blade is a consumable

Fig.4.

✮✌

Fig.5.

✱✌

- 7 -

✯✌

✰✌

✱✌

✳✌

✴✌

✯✌

Fig.6.

Fig.7.