- ページ 15

グラインダー Draper 83607のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper 83607 20 ページ。 2100w 230v 230mm angle grinder

BASIC GRINDER OPERATIONS

9.5 CUTTING - FIG. 6

FIG.6

When cutting do not incline the grinder and do not

jam the grinder on the work surface. The cutting edge

of the disc must be in perfect condition (Fig.6). (For

hard stone a diamond-tipped cutting wheel is

recommended.)

Cutting operations should only be

attempted with the "cutting" guard

fitted to this grinder.

This guard must be fitted for your

safety.

When performing cutting-off

operations do not incline the

machine as this can lead to the abrasive wheel

becoming jammed, damaged or excessively and

abnormally worn.

Only use abrasives specifically designed for this task.

WARNING: As the cutting-off/grinding wheel wears

during use, its diameter reduces. This reduces the

peripheral speed and the cutting efficiency. This

results in increased load on the grinding machine

which if continued will damage the motor. Ensure

that the diameter of the wheel is within 25% of its

original size.

IMPORTANT: Excessive pressure on the machine does

not result in a higher abrasive efficiency. Excessive -

pressure increases wear and tear on the accessory and

will damage the grinder which is not covered under

the guarantee.

For reasons of safety, when working with this type of electric power tool, the operator must

always use the supplementary handgrip.

In order to fit the handgrip on the grinder, insert it into one of the three threaded seats in

the aluminium head and screw in clockwise until fully tightened.

The functions and use of this tool are those exclusively indicated in this manual. ANY OTHER

USE OF THE TOOL IS CONSIDERED AS MISUSE.