室内装飾品 Draper FlexShade NEXDのPDF 説明書 インストールと操作をオンラインで閲覧またはダウンロードできます。Draper FlexShade NEXD 10 ページ。 Clutch-operated small and large hardware
Draper FlexShade NEXD にも： 取付・取扱説明書 (6 ページ), 説明書 インストールと操作 (8 ページ), 取扱説明書 (8 ページ), 説明書 インストールと操作 (8 ページ), 取扱説明書 (12 ページ)
ページを印刷する
Bottom-Up FlexShade
Small and Large Hardware
Premium manually-operated bottom-up shade
Overview - Components
FLEXBOTTOMUP NEXD
Read and understand all warnings
before beginning installation.
Contents
Overview - Components .......................................................................................1
PLEASE READ - Important Installation Information ........................................1
PLEASE READ - Important Safety Information .................................................2
PLEASE READ - Field Adjustments, Cleaning and Maintenance ...................2
Section 1 - Endcap Covers .................................................................................3
Section 2 - Mounting Endcaps ............................................................................3
Section 3 - Converting Between Mounting Configurations ...........................4
Section 4 - Spring Assist Idler .............................................................................4
Section 5 - Pre-tensioning Bottom Roller .........................................................5
NEXD,
®
CAUTION
(Page 2 of this document)
INSTRUCTIONS
INSTALLATION & OPERATION
PLEASE READ -
Important Installation Information
Caution:
1. Inspect all boxes to make sure you have received the
proper shades and parts. Controls may be shipped
separately, or in same carton as shades.
2. Open cartons lengthwise, taking care not to cut into
cardboard shipping container.
3. Before mounting shades, verify measurements on
label provided with shade, and ensure unit is installed
at correct width.
4. All endcaps, fascia, pocket headbox, and other
hardware must be installed level. Shades must be
level and square.
5. Read the following installation guidelines
thoroughly and follow them carefully. Failure to
do so may cause product to fall or otherwise fail,
and invalidates warranty.
6. Installer is responsible for selecting mounting
hardware appropriate for site conditions.
TOOLS REQUIRED
PENCIL
TAPE MEASURE
Section 6 - Hem Bar ..............................................................................................5
Section 7 - Bottom Roller Assembly ..................................................................6
Section 8 - Installing Draw Cables ....................................................................6
Section 9 - Adjusting Fabric Tracking ................................................................7
Section 11 - Top/Back Cover Installation ..........................................................8
Section 12 - Headbox Installation .......................................................................9
Section 13 - Bead Chain Limits and Safety Device Installation ...................10
Section 14 - Dimensions.....................................................................................10
If you have any difficulties installing or servicing your
Bottom-Up FlexShade
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2021 All Rights Reserved
POWER DRILL
PLIERS
LEVEL
HARDWARE
............................................................7
NEXD, call your dealer or Draper, Inc.
®
|
FORM: Bottom-Up_FS_NEXD_Inst21
(by others)