Draper FlexShade NEXD 설치 및 운영 지침

{카테고리_이름} Draper FlexShade NEXD에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper FlexShade NEXD 10 페이지. Clutch-operated small and large hardware
Draper FlexShade NEXD에 대해서도 마찬가지입니다: 설치 및 작동 지침 (6 페이지), 설치 및 운영 지침 (8 페이지), 사용 설명서 (8 페이지), 설치 및 운영 지침 (8 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

Bottom-Up FlexShade

Small and Large Hardware

Premium manually-operated bottom-up shade

Overview - Components

FLEXBOTTOMUP NEXD

Read and understand all warnings

before beginning installation.

Contents

Overview - Components .......................................................................................1

PLEASE READ - Important Installation Information ........................................1

PLEASE READ - Important Safety Information .................................................2

PLEASE READ - Field Adjustments, Cleaning and Maintenance ...................2

Section 1 - Endcap Covers .................................................................................3

Section 2 - Mounting Endcaps ............................................................................3

Section 3 - Converting Between Mounting Configurations ...........................4

Section 4 - Spring Assist Idler .............................................................................4

Section 5 - Pre-tensioning Bottom Roller .........................................................5

NEXD,

CAUTION

(Page 2 of this document)

INSTRUCTIONS

INSTALLATION & OPERATION

PLEASE READ -

Important Installation Information

Caution:

1. Inspect all boxes to make sure you have received the

proper shades and parts. Controls may be shipped

separately, or in same carton as shades.

2. Open cartons lengthwise, taking care not to cut into

cardboard shipping container.

3. Before mounting shades, verify measurements on

label provided with shade, and ensure unit is installed

at correct width.

4. All endcaps, fascia, pocket headbox, and other

hardware must be installed level. Shades must be

level and square.

5. Read the following installation guidelines

thoroughly and follow them carefully. Failure to

do so may cause product to fall or otherwise fail,

and invalidates warranty.

6. Installer is responsible for selecting mounting

hardware appropriate for site conditions.

TOOLS REQUIRED

PENCIL

TAPE MEASURE

Scan this QR Code with

your smartphone to view

Section 6 - Hem Bar ..............................................................................................5

Section 7 - Bottom Roller Assembly ..................................................................6

Section 8 - Installing Draw Cables ....................................................................6

Section 9 - Adjusting Fabric Tracking ................................................................7

Section 10 - Attaching Fascia

(Top Roller)

Section 11 - Top/Back Cover Installation ..........................................................8

Section 12 - Headbox Installation .......................................................................9

Section 13 - Bead Chain Limits and Safety Device Installation ...................10

Section 14 - Dimensions.....................................................................................10

If you have any difficulties installing or servicing your

Bottom-Up FlexShade

Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385

draperinc.com | 765.987.7999 | 800.238.7999

POWER DRILL

PLIERS

LEVEL

HARDWARE

our online video,

or click HERE.

............................................................7

NEXD, call your dealer or Draper, Inc.

FORM: Bottom-Up_FS_NEXD_Inst21

(by others)