- ページ 12

サンダー Draper 16061のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper 16061 20 ページ。 400w 230v oscillating multi-tool kit
Draper 16061 にも：インストラクション (16 ページ)

BASIC MULTI-TOOL OPERATIONS

8.4 USING THE VARIABLE SPEED CONTROL -

FIG. 5

Select oscillation frequency (speed) while the motor is

running. The variable speed control

set the optimum oscillating frequency according to the

accessories used and the respective application.

HIGH OSCILLATION FREQUENCY:

Sanding, sawing, rasping and polishing stone and metal.

LOW OSCILLATION FREQUENCY:

Polishing varnishes.

CAUTION: Before working with your tool make sure

that no power cords will be damaged.

Typical application: wood, metal; small areas, especially

corners, edges and places difficult to access. Select high

oscillation frequency (for variable speed models).

Sand with a constant movement and light pressure.

Heavy pressure does not increase the removal - the

sanding sheet merely wears faster.

8.7 SAWING WITH THE SEGMENT SAW

BLADE

Typical application: wood, plastics, sheet metal. Select

high oscillation frequency (for variable speed models).

The saw blade lasts longer if the wear is distributed

evenly. To ensure an even distribution, loosen the saw

blade, rotate it and retighten firmly.

Typical application: Scraping off old varnish or

adhesives, removing glued carpeting, e.g. on stairs or

other small to medium-sized surfaces.

Select medium/high oscillation frequency (for variable

speed models).

can be used to

FIG.5