Draper 16061 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sander Draper 16061. Draper 16061 20 stron. 400w 230v oscillating multi-tool kit
Również dla Draper 16061: Instrukcje dotyczące (16 strony)

Drukuj stronę

BASIC MULTI-TOOL OPERATIONS

8.4 USING THE VARIABLE SPEED CONTROL -

FIG. 5

Select oscillation frequency (speed) while the motor is

running. The variable speed control

set the optimum oscillating frequency according to the

accessories used and the respective application.

HIGH OSCILLATION FREQUENCY:

Sanding, sawing, rasping and polishing stone and metal.

LOW OSCILLATION FREQUENCY:

Polishing varnishes.

8.5 SECURING THE WORKPIECE

CAUTION: Before working with your tool make sure

that no power cords will be damaged.

8.6 SANDING

Typical application: wood, metal; small areas, especially

corners, edges and places difficult to access. Select high

oscillation frequency (for variable speed models).

Sand with a constant movement and light pressure.

Heavy pressure does not increase the removal - the

sanding sheet merely wears faster.

8.7 SAWING WITH THE SEGMENT SAW

BLADE

Typical application: wood, plastics, sheet metal. Select

high oscillation frequency (for variable speed models).

The saw blade lasts longer if the wear is distributed

evenly. To ensure an even distribution, loosen the saw

blade, rotate it and retighten firmly.

8.8 SCRAPING

Typical application: Scraping off old varnish or

adhesives, removing glued carpeting, e.g. on stairs or

other small to medium-sized surfaces.

Select medium/high oscillation frequency (for variable

speed models).

can be used to

FIG.5